Homebuilt quick hitch snowplow 



To remove the snow, I wanted to be able to use the plow, the blower and the sweeper, but I only got two tractors. Lucky me, I discovered that the blower had a quick hitch adepter. So I went on and made a QH-attachmentreceiver for the snowplow. Below is the result. So far, the construction seems to manage the removal of the snow.  



The receiverhole on the MA-211 

One thick plate of steel, three short pieces of steelpipe,
an migwelder, and I got a QH-snowplow which fit to the
tapered pin and those lower long bolts with distancepipes on
the picture below



  The plow mounted on the 5200